Quote Now


Solutions for Your Industry, Ready for Your Choice

%{tishi_zhanwei}%

FAQ


If you have any other questions, please feel free to contact us. We are here to serve you!

How often should cooling equipment be maintained? What kind of maintenance does it need?

For regular industrial units, it's recommended to do maintenance every 3 to 6 months; clean the dust from the condenser and evaporator; wash the filters; check the electrical wiring and compressor running current; check the refrigerant pressure and all seals; tighten the pipe brackets.

Can you add refrigerant to the cooling system however you want?

No. You need to check for leaks first, and after fixing any leaks, fill according to the model number on the equipment nameplate. You can't mix refrigerant types, and adding too much or too little can damage the compressor.

The machine is running fine, but it's cooling slowly and there's not enough cold.

① The condenser is clogged with dust, so the heat dissipation is poor; ② The evaporator has frost or scale buildup, reducing heat exchange efficiency; ③ Refrigerant leaks or not enough refrigerant; ④ The circulating water flow is too low; ⑤ The ambient temperature is beyond the equipment's rated range; ⑥ Damage to the insulation layer causes loss of cooling.

Is the refrigeration unit starting and stopping frequently, constantly turning on and off?

① The temperature sensor is displaced or damaged, causing inaccurate temperature readings; ② Poor heat dissipation, making the high-voltage protection trip frequently; ③ The system has too much or too little refrigerant; ④ Voltage instability triggers compressor overload protection; ⑤ Insufficient flow from the circulating water pump triggers water flow protection.

What's the reason the device won't start after being powered on?

First, check if the power voltage, circuit breaker, and wiring are normal; check the thermostat setting, because if the set temperature is higher than the ambient temperature, the unit won't start; also check if the high and low voltage protection, water flow protection, and overload protection have been triggered; faults in the contactor or thermal relay can also prevent the unit from turning on.

< 1 >